b946147539
I noticed that Argon40 updated the scripts... they must be getting ready for release, so I grabbed the older ones off of the original boot device for my Argon OneUp. Will add anything else here that I find as well.
75 lines
1.5 KiB
Python
75 lines
1.5 KiB
Python
#!/usr/bin/python3
|
|
|
|
#
|
|
# Argon Register Helper methods
|
|
# Same as argonregister, but no support for new register commands
|
|
#
|
|
|
|
import time
|
|
import smbus
|
|
|
|
# I2C Addresses
|
|
ADDR_ARGONONEFAN=0x1a
|
|
ADDR_ARGONONEREG=ADDR_ARGONONEFAN
|
|
|
|
# ARGONONEREG Addresses
|
|
ADDR_ARGONONEREG_DUTYCYCLE=0x80
|
|
ADDR_ARGONONEREG_FW=0x81
|
|
ADDR_ARGONONEREG_IR=0x82
|
|
ADDR_ARGONONEREG_CTRL=0x86
|
|
|
|
# Initialize bus
|
|
def argonregister_initializebusobj():
|
|
try:
|
|
return smbus.SMBus(1)
|
|
except Exception:
|
|
try:
|
|
# Older version
|
|
return smbus.SMBus(0)
|
|
except Exception:
|
|
print("Unable to detect i2c")
|
|
return None
|
|
|
|
|
|
# Checks if the FW supports control registers
|
|
def argonregister_checksupport(busobj):
|
|
return False
|
|
|
|
def argonregister_getbyte(busobj, address):
|
|
if busobj is None:
|
|
return 0
|
|
return busobj.read_byte_data(ADDR_ARGONONEREG, address)
|
|
|
|
def argonregister_setbyte(busobj, address, bytevalue):
|
|
if busobj is None:
|
|
return
|
|
busobj.write_byte_data(ADDR_ARGONONEREG,address,bytevalue)
|
|
time.sleep(1)
|
|
|
|
def argonregister_getfanspeed(busobj, regsupport=None):
|
|
return 0
|
|
|
|
def argonregister_setfanspeed(busobj, newspeed, regsupport=None):
|
|
if busobj is None:
|
|
return
|
|
|
|
if newspeed > 100:
|
|
newspeed = 100
|
|
elif newspeed < 0:
|
|
newspeed = 0
|
|
|
|
busobj.write_byte(ADDR_ARGONONEFAN,newspeed)
|
|
time.sleep(1)
|
|
|
|
def argonregister_signalpoweroff(busobj):
|
|
if busobj is None:
|
|
return
|
|
|
|
busobj.write_byte(ADDR_ARGONONEFAN,0xFF)
|
|
|
|
def argonregister_setircode(busobj, vallist):
|
|
if busobj is None:
|
|
return
|
|
|
|
busobj.write_i2c_block_data(ADDR_ARGONONEREG, ADDR_ARGONONEREG_IR, vallist)
|