Add examples and comments to default config

This commit is contained in:
Ed Sandor 2020-12-12 11:23:35 -07:00
parent b04dcc18d0
commit 86fdbe45e9

View File

@ -336,6 +336,35 @@ aprs_igate_beacon = False
# path to the aprs symbols repository (get it here: https://github.com/hessu/aprs-symbols)
aprs_symbols_path = "/usr/share/aprs-symbols/png"
# Uncomment the following to customize gateway beacon details reported to the aprs network
# Plese see Dire Wolf's documentation on PBEACON configuration for complete details:
# https://github.com/wb2osz/direwolf/raw/master/doc/User-Guide.pdf
# Symbol in its two-character form as specified by the APRS spec at http://www.aprs.org/symbols/symbols-new.txt
# Default: Receive only IGate (do not send msgs back to RF)
# aprs_igate_symbol = "R&"
# Custom comment about igate
# Default: OpenWebRX APRS gateway
# aprs_igate_comment = "OpenWebRX APRS gateway"
# Antenna Power, Height, Gain, and Direction
# Unspecified by default
# Transmitter power (0 by default as only RX is supported)
# aprs_igate_power = "0"
# Antenna height in feet
# aprs_igate_height = "20"
# Antenna gain in dBi
# aprs_igate_gain = "0"
# Antenna direction (N, NE, E, SE, S, SW, W, NW). Omnidirectional by default
# aprs_igate_dir = "NE"
# Frequency info to contact you by voice
# Unspecified by default
# aprs_igate_freq = "146.955"
# aprs_igate_tone = "74.4"
# aprs_igate_offset = "-0.60"
# === PSK Reporter setting ===
# enable this if you want to upload all ft8, ft4 etc spots to pskreporter.info
# this also uses the receiver_gps setting from above, so make sure it contains a correct locator