# -*- coding: utf-8 -*- """ config_webrx: configuration options for OpenWebRX This file is part of OpenWebRX, an open-source SDR receiver software with a web UI. Copyright (c) 2013-2015 by Andras Retzler This program is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more details. You should have received a copy of the GNU Affero General Public License along with this program. If not, see . ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ In addition, as a special exception, the copyright holders state that config_rtl.py and config_webrx.py are not part of the Corresponding Source defined in GNU AGPL version 3 section 1. (It means that you do not have to redistribute config_rtl.py and config_webrx.py if you make any changes to these two configuration files, and use them for running your web service with OpenWebRX.) """ # NOTE: you can find additional information about configuring OpenWebRX in the Wiki: # https://github.com/simonyiszk/openwebrx/wiki # ==== Server settings ==== web_port=8073 max_clients=20 # ==== Web GUI configuration ==== receiver_name="[Callsign]" receiver_location="Budapest, Hungary" receiver_qra="JN97ML" receiver_asl=200 receiver_ant="Longwire" receiver_device="RTL-SDR" receiver_admin="example@example.com" receiver_gps=(47.000000,19.000000) photo_height=350 photo_title="Panorama of Budapest from Schönherz Zoltán Dormitory" photo_desc=""" You can add your own background photo and receiver information.
Receiver is operated by: %[RX_ADMIN]
Device: %[RX_DEVICE]
Antenna: %[RX_ANT]
Website: http://localhost """ # ==== sdr.hu listing ==== # If you want your ham receiver to be listed publicly on sdr.hu, then take the following steps: # 1. Register at: http://sdr.hu/register # 2. You will get an unique key by email. Copy it and paste here: sdrhu_key = "" # 3. Set this setting to True to enable listing: sdrhu_public_listing = False server_hostname="localhost" # ==== DSP/RX settings ==== fft_fps=9 fft_size=4096 #Should be power of 2 fft_voverlap_factor=0.3 #If fft_voverlap_factor is above 0, multiple FFTs will be used for creating a line on the diagram. audio_compression="adpcm" #valid values: "adpcm", "none" fft_compression="adpcm" #valid values: "adpcm", "none" digimodes_enable=True #Decoding digimodes come with higher CPU usage. digimodes_fft_size=1024 """ Note: if you experience audio underruns while CPU usage is 100%, you can: - decrease `samp_rate`, - set `fft_voverlap_factor` to 0, - decrease `fft_fps` and `fft_size`, - limit the number of users by decreasing `max_clients`. """ # ==== I/Q sources ==== # (Uncomment the appropriate by removing # characters at the beginning of the corresponding lines.) ################################################################################################# # Is my SDR hardware supported? # # Check here: https://github.com/simonyiszk/openwebrx/wiki#guides-for-receiver-hardware-support # ################################################################################################# # Currently supported types of sdr receivers: "rtl_sdr", "sdrplay", "hackrf" sdrs = { "rtlsdr": { "name": "RTL-SDR USB Stick", "type": "rtl_sdr", "ppm": 0, # you can change this if you use an upconverter. formula is: # shown_center_freq = center_freq + lfo_offset # "lfo_offset": 0, "profiles": { "70cm": { "name": "70cm Relais", "center_freq": 438800000, "rf_gain": 30, "samp_rate": 2400000, "start_freq": 439275000, "start_mod": "nfm" }, "2m": { "name": "2m komplett", "center_freq": 145000000, "rf_gain": 30, "samp_rate": 2400000, "start_freq": 145725000, "start_mod": "nfm" } } }, "sdrplay": { "name": "SDRPlay RSP2", "type": "sdrplay", "ppm": 0, "profiles": { "20m": { "name":"20m", "center_freq": 14150000, "rf_gain": 40, "samp_rate": 500000, "start_freq": 14070000, "start_mod": "usb" }, "40m": { "name":"40m", "center_freq": 7100000, "rf_gain": 40, "samp_rate": 500000, "start_freq": 7070000, "start_mod": "usb" }, "80m": { "name":"80m", "center_freq": 3650000, "rf_gain": 40, "samp_rate": 500000, "start_freq": 3570000, "start_mod": "usb" }, "49m": { "name": "49m Broadcast", "center_freq": 6000000, "rf_gain": 40, "samp_rate": 500000, "start_freq": 6070000, "start_mod": "am" } } }, # this one is just here to test feature detection "test": { "type": "test" } } # ==== Misc settings ==== client_audio_buffer_size = 5 #increasing client_audio_buffer_size will: # - also increase the latency # - decrease the chance of audio underruns iq_port_range = [4950, 4960] #TCP port for range ncat to listen on. It will send I/Q data over its connections, for internal use in OpenWebRX. It is only accessible from the localhost by default. # ==== Color themes ==== #A guide is available to help you set these values: https://github.com/simonyiszk/openwebrx/wiki/Calibrating-waterfall-display-levels ### default theme by teejez: waterfall_colors = [0x000000ff,0x0000ffff,0x00ffffff,0x00ff00ff,0xffff00ff,0xff0000ff,0xff00ffff,0xffffffff] waterfall_min_level = -88 #in dB waterfall_max_level = -20 waterfall_auto_level_margin = (5, 40) ### old theme by HA7ILM: #waterfall_colors = "[0x000000ff,0x2e6893ff, 0x69a5d0ff, 0x214b69ff, 0x9dc4e0ff, 0xfff775ff, 0xff8a8aff, 0xb20000ff]" #waterfall_min_level = -115 #in dB #waterfall_max_level = 0 #waterfall_auto_level_margin = (20, 30) ##For the old colors, you might also want to set [fft_voverlap_factor] to 0. #Note: When the auto waterfall level button is clicked, the following happens: # [waterfall_min_level] = [current_min_power_level] - [waterfall_auto_level_margin[0]] # [waterfall_max_level] = [current_max_power_level] + [waterfall_auto_level_margin[1]] # # ___|____________________________________|____________________________________|____________________________________|___> signal power # \_waterfall_auto_level_margin[0]_/ |__ current_min_power_level | \_waterfall_auto_level_margin[1]_/ # current_max_power_level __| # 3D view settings mathbox_waterfall_frequency_resolution = 128 #bins mathbox_waterfall_history_length = 10 #seconds mathbox_waterfall_colors = [0x000000ff,0x2e6893ff,0x69a5d0ff,0x214b69ff,0x9dc4e0ff,0xfff775ff,0xff8a8aff,0xb20000ff] # === Experimental settings === #Warning! The settings below are very experimental. csdr_dynamic_bufsize = False # This allows you to change the buffering mode of csdr. csdr_print_bufsizes = False # This prints the buffer sizes used for csdr processes. csdr_through = False # Setting this True will print out how much data is going into the DSP chains. nmux_memory = 50 #in megabytes. This sets the approximate size of the circular buffer used by nmux.