Added Arduino Sketch

i2c-scanner.ino

@@ -0,0 +1,61 @@
+/* I2C SCANNER
+   http://playground.arduino.cc/Main/I2cScanner
+
+   This sketch tests the standard 7-bit addresses
+   Devices with higher bit address might not be seen properly.
+ */
+
+
+#include <Wire.h>
+
+
+void setup()
+{
+  Wire.begin();
+
+  Serial.begin(9600);
+  Serial.println("\nI2C Scanner");
+}
+
+
+void loop()
+{
+  byte error, address;
+  int nDevices;
+
+  Serial.println("Scanning...");
+
+  nDevices = 0;
+  for(address = 1; address < 127; address++ ) 
+  {
+    // The i2c_scanner uses the return value of
+    // the Write.endTransmisstion to see if
+    // a device did acknowledge to the address.
+    Wire.beginTransmission(address);
+    error = Wire.endTransmission();
+
+    if (error == 0)
+    {
+      Serial.print("I2C device found at address 0x");
+      if (address<16) 
+        Serial.print("0");
+      Serial.print(address,HEX);
+      Serial.println("  !");
+
+      nDevices++;
+    }
+    else if (error==4) 
+    {
+      Serial.print("Unknow error at address 0x");
+      if (address<16) 
+        Serial.print("0");
+      Serial.println(address,HEX);
+    }    
+  }
+  if (nDevices == 0)
+    Serial.println("No I2C devices found\n");
+  else
+    Serial.println("done\n");
+
+  delay(5000);           // wait 5 seconds for next scan
+}