From 37040fc480249d3aa898467322fb31ba208cd10d Mon Sep 17 00:00:00 2001 From: Kyle Gabriel Date: Tue, 27 Aug 2019 18:18:04 -0400 Subject: [PATCH] update README --- README.md | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/README.md b/README.md index ec725de..8f61e18 100644 --- a/README.md +++ b/README.md @@ -22,11 +22,13 @@ NOTE: There are now 2 versions of the TTGO T-BEAM, the first version (Rev0) and 3. Edit the library file ```arduino-lmic/project_config/lmic_project_config.h``` and uncomment the proper frequency for your region. -4. Edit this project file ```main/configuration.h``` and select your correct board revision, either T_BEAM_V07 or T_BEAM_V10 (see [T-BEAM Board Versions](#t-beam-board-versions) to determine which board revision you have). +4. Edit the project file ```main/lmic_project_config.h``` and uncomment the proper frequency for your region. -5. Edit this project file ```main/credentials.h``` to use either ```USE_ABP``` or ```USE_OTAA``` and add the Keys/EUIs for your Application's Device from The Things Network. +5. Edit this project file ```main/configuration.h``` and select your correct board revision, either T_BEAM_V07 or T_BEAM_V10 (see [T-BEAM Board Versions](#t-beam-board-versions) to determine which board revision you have). -6. Add the TTN Mapper integration to your Application (and optionally the Data Storage integration if you want to access the GPS location information yourself or use [TTN Tracker](#ttn-tracker), then add the Decoder code: +6. Edit this project file ```main/credentials.h``` to use either ```USE_ABP``` or ```USE_OTAA``` and add the Keys/EUIs for your Application's Device from The Things Network. + +7. Add the TTN Mapper integration to your Application (and optionally the Data Storage integration if you want to access the GPS location information yourself or use [TTN Tracker](#ttn-tracker), then add the Decoder code: ```C function Decoder(bytes, port) { @@ -50,9 +52,9 @@ function Decoder(bytes, port) { } ``` -7. Open this project file ```main/main.ino``` with the Arduino IDE and upload it to your TTGO T-Beam. +8. Open this project file ```main/main.ino``` with the Arduino IDE and upload it to your TTGO T-Beam. -8. Turn on the device and once a GPS lock is acquired, the device will start sending data to TTN and TTN Mapper. +9. Turn on the device and once a GPS lock is acquired, the device will start sending data to TTN and TTN Mapper. ### TTN Tracker