unixweb/ttgo-t-beam-gps-ttn-tracker
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add code for Rev1 T-Beam

Browse Source
This commit is contained in:
Kyle Gabriel
2019-08-25 12:57:37 -04:00
parent b8f6df7f53
commit 5ee5b3e794
3 changed files with 68 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
main/configuration.h
View File

@ -126,7 +126,7 @@ void ttn_register(void (*callback)(uint8_t message));
// Rev1-specific options
// -----------------------------------------------------------------------------
#if defined(T_BEAM_V10)
#ifdef T_BEAM_V10
#define GPS_POWER_CTRL_CH 3
#define LORA_POWER_CTRL_CH 2
#endif

56
main/main.ino
View File

@ -129,10 +129,62 @@ uint32_t get_count() {
}
void setup() {
// Serial.begin(115200);
// Debug
#ifdef DEBUG_PORT
#ifdef DEBUG_PORT
DEBUG_PORT.begin(SERIAL_BAUD);
#endif
#endif
#ifdef T_BEAM_V10
axp192_found = 1;
if (axp192_found) {
if (!axp.begin(Wire, AXP192_SLAVE_ADDRESS)) {
Serial.println("AXP192 Begin PASS");
} else {
Serial.println("AXP192 Begin FAIL");
}
// axp.setChgLEDMode(LED_BLINK_4HZ);
// Serial.printf("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
// Serial.println("----------------------------------------");
axp.setPowerOutPut(AXP192_LDO2, AXP202_ON);
axp.setPowerOutPut(AXP192_LDO3, AXP202_ON);
axp.setPowerOutPut(AXP192_DCDC2, AXP202_ON);
axp.setPowerOutPut(AXP192_EXTEN, AXP202_ON);
axp.setPowerOutPut(AXP192_DCDC1, AXP202_ON);
axp.setDCDC1Voltage(3300);
// Serial.printf("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
// Serial.printf("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
pinMode(PMU_IRQ, INPUT_PULLUP);
attachInterrupt(PMU_IRQ, [] {
pmu_irq = true;
}, FALLING);
axp.adc1Enable(AXP202_BATT_CUR_ADC1, 1);
axp.enableIRQ(AXP202_VBUS_REMOVED_IRQ | AXP202_VBUS_CONNECT_IRQ | AXP202_BATT_REMOVED_IRQ | AXP202_BATT_CONNECT_IRQ, 1);
axp.clearIRQ();
if (axp.isChargeing()) {
baChStatus = "Charging";
}
} else {
// Serial.println("AXP192 not found");
}
Serial1.begin(GPS_BANUD_RATE, SERIAL_8N1, GPS_RX_PIN, GPS_TX_PIN);
#endif
// Buttons & LED
pinMode(BUTTON_PIN, INPUT_PULLUP);