Merge pull request #35 from paderijk/PAdR-UX-Improvement-20200114

Generic User Experience improvements

README.md

@@ -1,6 +1,6 @@
 ## TTGO T-Beam Tracker for The Things Network
 
-Current version: 1.2.0
+Current version: 1.2.1
 
 Uploads GPS data from the TTGO T-Beam to [The Things Network](https://www.thethingsnetwork.org) (TTN) and [TTN Mapper](https://ttnmapper.org) for tracking and determining signal strength of LoRaWAN gateways and nodes.
 

main/configuration.h

@@ -33,15 +33,15 @@ void ttn_register(void (*callback)(uint8_t message));
 // -----------------------------------------------------------------------------
 
 #define APP_NAME                "TTN MAP-TRACK"
-#define APP_VERSION             "1.2.0"
+#define APP_VERSION             "1.2.1"
 
 // -----------------------------------------------------------------------------
 // Configuration
 // -----------------------------------------------------------------------------
 
 // Select which T-Beam board is being used. Only uncomment one.
-// #define T_BEAM_V07  // AKA Rev0 (first board released)
+#define T_BEAM_V07  // AKA Rev0 (first board released)
-#define T_BEAM_V10  // AKA Rev1 (second board released)
+// #define T_BEAM_V10  // AKA Rev1 (second board released)
 
 // Select the payload format. Change on TTN as well. Only uncomment one.
 #define PAYLOAD_USE_FULL
@@ -50,6 +50,12 @@ void ttn_register(void (*callback)(uint8_t message));
 // If using a single-channel gateway, uncomment this next option and set to your gateway's channel
 //#define SINGLE_CHANNEL_GATEWAY  0
 
+//Uncomment if you always want to see the boot logo at boot time
+#define ALWAYS_SHOW_LOGO
+
+//Uncomment to enable discarding network settings by long pressing second button
+//#define PREFS_DISCARD
+
 // If you are having difficulty sending messages to TTN after the first successful send,
 // uncomment the next option and experiment with values (~ 1 - 5)
 //#define CLOCK_ERROR             5

main/credentials.h

@@ -24,17 +24,17 @@ Credentials file
 
 #ifdef USE_OTAA
 
-    // This EUI must be in little-endian format, so least-significant-byte
+    // This EUI must be in little-endian format, so least-significant-byte (lsb)
     // first. When copying an EUI from ttnctl output, this means to reverse
     // the bytes. For TTN issued EUIs the last bytes should be 0x00, 0x00,
     // 0x00.
     static const u1_t PROGMEM APPEUI[8]  = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
 
-    // This should also be in little endian format, see above.
+    // This should also be in little endian format (lsb), see above.
     // Note: You do not need to set this field, if unset it will be generated automatically based on the device macaddr
     static u1_t DEVEUI[8]  = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
 
-    // This key should be in big endian format (or, since it is not really a
+    // This key should be in big endian format (msb) (or, since it is not really a
     // number but a block of memory, endianness does not really apply). In
     // practice, a key taken from ttnctl can be copied as-is.
     // The key shown here is the semtech default key.

main/main.ino

@@ -74,7 +74,8 @@ bool trySend() {
     buildPacket(txBuffer);
 
 #if LORAWAN_CONFIRMED_EVERY > 0
-    bool confirmed = (count % LORAWAN_CONFIRMED_EVERY == 0);
+    bool confirmed = (ttn_get_count() % LORAWAN_CONFIRMED_EVERY == 0);
+    if (confirmed){ Serial.println("confirmation enabled"); }
 #else
     bool confirmed = false;
 #endif
@@ -152,9 +153,16 @@ void sleep() {
 
 
 void callback(uint8_t message) {
-  if (EV_JOINING == message) screen_print("Joining TTN...\n");
+  bool ttn_joined = false;
   if (EV_JOINED == message) {
-    screen_print("TTN joined!\n");
+    ttn_joined = true;
+  }
+  if (EV_JOINING == message) {
+    if (ttn_joined) {
+      screen_print("TTN joining...\n");
+    } else {
+      screen_print("Joined TTN!\n");
+    }
   }
   if (EV_JOIN_FAILED == message) screen_print("TTN join failed\n");
   if (EV_REJOIN_FAILED == message) screen_print("TTN rejoin failed\n");
@@ -334,12 +342,17 @@ void setup() {
   gps_setup();
 
   // Show logo on first boot after removing battery
+
+#ifndef ALWAYS_SHOW_LOGO 
   if (bootCount == 0) {
+#endif
     screen_print(APP_NAME " " APP_VERSION, 0, 0);
     screen_show_logo();
     screen_update();
     delay(LOGO_DELAY);
-  }
+ #ifndef ALWAYS_SHOW_LOGO
+ }
+#endif
 
   // TTN setup
   if (!ttn_setup()) {
@@ -382,10 +395,15 @@ void loop() {
     wasPressed = false;
     if(millis() > minPressMs) {
       // held long enough
-      screen_print("Erasing prefs");
+#ifndef PREFS_DISCARD
+      screen_print("Discarding prefs disabled\n");
+#endif 
+#ifdef PREFS_DISCARD
+      screen_print("Discarding prefs!\n");
       ttn_erase_prefs();
       delay(5000); // Give some time to read the screen
       ESP.restart();
+#endif
     }
   }