From bb9a6ebf313221fd96cb0f75ead4749dcc788176 Mon Sep 17 00:00:00 2001
From: Kyle Gabriel <kyletgabriel@gmail.com>
Date: Sun, 25 Aug 2019 13:29:56 -0400
Subject: [PATCH] uncomment Serial.print lines

---
 main/main.ino | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/main/main.ino b/main/main.ino
index ecef653..72ea68d 100644
--- a/main/main.ino
+++ b/main/main.ino
@@ -129,8 +129,6 @@ uint32_t get_count() {
 }
 
 void setup() {
-  // Serial.begin(115200);
-
   // Debug
   #ifdef DEBUG_PORT
   DEBUG_PORT.begin(SERIAL_BAUD);
@@ -145,13 +143,13 @@ void setup() {
           Serial.println("AXP192 Begin FAIL");
       }
       // axp.setChgLEDMode(LED_BLINK_4HZ);
-      // Serial.printf("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
-      // Serial.println("----------------------------------------");
+      Serial.printf("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
+      Serial.println("----------------------------------------");
 
       axp.setPowerOutPut(AXP192_LDO2, AXP202_ON);
       axp.setPowerOutPut(AXP192_LDO3, AXP202_ON);
@@ -160,12 +158,12 @@ void setup() {
       axp.setPowerOutPut(AXP192_DCDC1, AXP202_ON);
       axp.setDCDC1Voltage(3300);
 
-      // Serial.printf("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
-      // Serial.printf("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
+      Serial.printf("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
+      Serial.printf("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
 
       pinMode(PMU_IRQ, INPUT_PULLUP);
       attachInterrupt(PMU_IRQ, [] {
@@ -180,7 +178,7 @@ void setup() {
           baChStatus = "Charging";
       }
   } else {
-      // Serial.println("AXP192 not found");
+      Serial.println("AXP192 not found");
   }
 
   Serial1.begin(GPS_BANUD_RATE, SERIAL_8N1, GPS_RX_PIN, GPS_TX_PIN);