geeksville
e890e7a80a
deep sleep now powers down GPS and lora radio
2020-02-01 05:30:08 -08:00
geeksville
2a2e8172e3
show screen messages out serial port (for screenless devices)
2020-02-01 05:02:45 -08:00
geeksville
fb662abe6d
debug console is 115200 bps
2020-02-01 05:02:27 -08:00
geeksville
e1189839fe
on initial powerup GPS generates a fake zero alt report (before lock)
2020-02-01 05:02:12 -08:00
geeksville
1f01b71d4a
require radio now that I've tested with real hardware
2020-02-01 05:01:22 -08:00
geeksville
e84a840190
if prefs file open fails, don't try other operations
2020-01-20 10:51:58 -08:00
geeksville
5a11a7a880
to facilitate development make radio optional for now
2020-01-20 10:51:35 -08:00
geeksville
8863cb7d5c
enter deep sleep as soon as we send one packet
2020-01-19 10:59:30 -08:00
geeksville
a35c6dcbe9
dynamically probe for screen and don't even use it if...
...
waking from deep sleep timer
2020-01-19 10:12:48 -08:00
geeksville
2da1f623ff
read wake reason at boot
2020-01-19 10:01:05 -08:00
geeksville
ddf47aa134
begin implementing deep sleep (and powering down gps/lora/display)
2020-01-18 18:01:28 -08:00
geeksville
716c355b21
move axpinit and document LDO & LED usage on V1 hardware
2020-01-18 17:41:17 -08:00
geeksville
4018141a45
generate DevEUI based on macaddr if not defined
2020-01-18 14:11:00 -08:00
geeksville
c6e1053ed1
oops - though these pins are no connects, we need to lie to the lmic
...
library because it has an assertion check that will fail.
2020-01-18 13:28:12 -08:00
geeksville
c263355ada
Store joinned network info in flash, so that OTAA will work nicely
2020-01-18 13:21:00 -08:00
geeksville
fdc0edee88
make lora packet count persist in flash (also remove some unneeded init)
2020-01-18 12:37:39 -08:00
geeksville
73bac3be45
we are supposed to use 0xff to mark unused gpios
2020-01-17 21:30:41 -08:00
geeksville
67b6555cc0
remove old settings
2020-01-17 21:29:38 -08:00
geeksville
33483b3d53
share common init and make OTAA work correctly with a non single-ch gway
2020-01-17 21:00:10 -08:00
geeksville
6a0382cba5
fix warning about nop redefinition of axp192 address
2020-01-17 15:39:01 -08:00
geeksville
6f2fd78ae2
switch to V10 BEAM, fix incorrect reset pin binding
2020-01-17 15:37:37 -08:00
geeksville
bb01201e57
we don't want warnings about missing initalizers
2020-01-17 15:22:03 -08:00
geeksville
a1166364a7
altitudeGps is an integer, fix the format string.
...
/home/kevinh/development/lora/ttgo-tbeam-ttn-tracker/main/gps.ino: In function 'void buildPacket(uint8_t*)':
/home/kevinh/development/lora/ttgo-tbeam-ttn-tracker/main/gps.ino:83:42: warning: format '%f' expects argument of type 'double', but argument 3 has type 'int' [-Wformat=]
sprintf(t, "Alt: %f", altitudeGps);
2020-01-17 15:19:18 -08:00
geeksville
e36d706c95
add vscode workspace definitions
2020-01-17 15:16:42 -08:00
geeksville
1e9fedcbd7
minor changes needed to build with platformio
...
I prefer platformio over the arduino IDE because
it automatically does library dependencies and
has lots of other goodness.
To build and install to a connected device just do:
pio run
2020-01-17 15:15:00 -08:00
Tim Kerby
4a1f360697
Bug fixes - frame counter, link checking and battery charge status
...
Fixed frame counter (was unsigned char, should have been uint_32) which caused TTN to ignore device after 255 frames and rollover when frame count checks enabled
Turned off link checking when ADR not in use as it was forcing confirmed links
Added display of battery charging status
2020-01-13 17:14:09 +00:00
Kyle Gabriel
8bad9225c2
remove redundant os_runloop_once() ( #5 )
2019-08-29 17:06:50 -04:00
Kyle Gabriel
c7e014fb38
Add CLOCK_ERROR option to enable/disable feature ( #4 )
2019-08-28 20:10:32 -04:00
Kyle Gabriel
d0ece33e8e
fix error if SINGLE_CHANNEL_GATEWAY not enabled
2019-08-28 19:55:30 -04:00
Kyle Gabriel
ce145d8751
TEST update
2019-08-28 19:49:13 -04:00
Kyle Gabriel
6334c93b38
Add LMIC_setClockError ( #4 )
2019-08-28 19:08:13 -04:00
Kyle Gabriel
b7f3b809f2
update README
2019-08-27 18:20:55 -04:00
Kyle Gabriel
5d31b90d19
update README
2019-08-27 18:20:42 -04:00
Kyle Gabriel
37040fc480
update README
2019-08-27 18:18:04 -04:00
Kyle Gabriel
28c8cd891c
update README
2019-08-27 18:12:50 -04:00
Kyle Gabriel
468c0dbeae
update serial print messages
2019-08-26 18:05:23 -04:00
Kyle Gabriel
6b073a2136
Fix sats calculation ( #3 )
2019-08-26 17:53:43 -04:00
Kyle Gabriel
e5bb5dd000
fix missing variable for Rev0
2019-08-25 20:58:12 -04:00
Kyle Gabriel
e7c53e4d34
update with scani2cdevice
2019-08-25 20:55:00 -04:00
Kyle Gabriel
27dc8c2cd0
Fix missing Wire.h for Rev1
2019-08-25 20:44:56 -04:00
Kyle Gabriel
359183da20
add reference to Rev1 code
2019-08-25 14:01:04 -04:00
Kyle Gabriel
ba4c897cee
Rev1 updates
2019-08-25 13:56:43 -04:00
Kyle Gabriel
36eacfc4a2
minor update
2019-08-25 13:47:15 -04:00
Kyle Gabriel
f0f709c508
minor update
2019-08-25 13:46:33 -04:00
Kyle Gabriel
43549cd5d7
Update for Rev1
2019-08-25 13:46:03 -04:00
Kyle Gabriel
bb9a6ebf31
uncomment Serial.print lines
2019-08-25 13:29:56 -04:00
Kyle Gabriel
ad61ee1ea1
minor fix
2019-08-25 13:26:21 -04:00
Kyle Gabriel
1348a3f9b7
fix missing variable declaration
2019-08-25 13:24:48 -04:00
Kyle Gabriel
b873b80279
update README
2019-08-25 13:09:27 -04:00
Kyle Gabriel
c93ecaf6c6
update README
2019-08-25 13:08:04 -04:00
