152 lines
5.5 KiB
C
152 lines
5.5 KiB
C
/*
|
|
|
|
TTGO T-BEAM Tracker for The Things Network
|
|
|
|
Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
|
|
|
|
This code requires LMIC library by Matthijs Kooijman
|
|
https://github.com/matthijskooijman/arduino-lmic
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <Arduino.h>
|
|
#include <lmic.h>
|
|
void ttn_register(void (*callback)(uint8_t message));
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Version
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#define APP_NAME "TTN MAP-TRACK"
|
|
#define APP_VERSION "1.1.0"
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Configuration
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// Select which T-Beam board is being used. Only uncomment one.
|
|
// #define T_BEAM_V07 // AKA Rev0 (first board released)
|
|
#define T_BEAM_V10 // AKA Rev1 (second board released)
|
|
|
|
// Select the payload format. Change on TTN as well. Only uncomment one.
|
|
#define PAYLOAD_USE_FULL
|
|
// #define PAYLOAD_USE_CAYENNE
|
|
|
|
// If using a single-channel gateway, uncomment this next option and set to your gateway's channel
|
|
//#define SINGLE_CHANNEL_GATEWAY 0
|
|
|
|
// If you are having difficulty sending messages to TTN after the first successful send,
|
|
// uncomment the next option and experiment with values (~ 1 - 5)
|
|
//#define CLOCK_ERROR 5
|
|
|
|
#define DEBUG_PORT Serial // Serial debug port
|
|
#define SERIAL_BAUD 115200 // Serial debug baud rate
|
|
#define SLEEP_BETWEEN_MESSAGES true // Do sleep between messages
|
|
#define SEND_INTERVAL (5 * 60 * 1000) // Sleep for these many millis
|
|
#define MESSAGE_TO_SLEEP_DELAY 5000 // Time after message before going to sleep
|
|
#define LOGO_DELAY 5000 // Time to show logo on first boot
|
|
#define LORAWAN_PORT 10 // Port the messages will be sent to
|
|
#define LORAWAN_CONFIRMED_EVERY 0 // Send confirmed message every these many messages (0 means never)
|
|
#define LORAWAN_SF DR_SF10 // Spreading factor (recommended DR_SF7 for ttn network map purposes, DR_SF10 works for slow moving trackers)
|
|
#define LORAWAN_ADR 0 // Enable ADR
|
|
#define REQUIRE_RADIO true // If true, we will fail to start if the radio is not found
|
|
|
|
// If not defined, we will wait for lock forever
|
|
#define GPS_WAIT_FOR_LOCK (60 * 1000) // Wait after every boot for GPS lock (may need longer than 5s because we turned the gps off during deep sleep)
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// DEBUG
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifdef DEBUG_PORT
|
|
#define DEBUG_MSG(...) DEBUG_PORT.printf( __VA_ARGS__ )
|
|
#else
|
|
#define DEBUG_MSG(...)
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Custom messages
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#define EV_QUEUED 100
|
|
#define EV_PENDING 101
|
|
#define EV_ACK 102
|
|
#define EV_RESPONSE 103
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// General
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#define I2C_SDA 21
|
|
#define I2C_SCL 22
|
|
|
|
#if defined(T_BEAM_V07)
|
|
#define LED_PIN 14
|
|
#define BUTTON_PIN 39
|
|
#elif defined(T_BEAM_V10)
|
|
#define BUTTON_PIN 38
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// OLED
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#define SSD1306_ADDRESS 0x3C
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// GPS
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#define GPS_SERIAL_NUM 1
|
|
#define GPS_BAUDRATE 9600
|
|
#define USE_GPS 1
|
|
|
|
#if defined(T_BEAM_V07)
|
|
#define GPS_RX_PIN 12
|
|
#define GPS_TX_PIN 15
|
|
#elif defined(T_BEAM_V10)
|
|
#define GPS_RX_PIN 34
|
|
#define GPS_TX_PIN 12
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// LoRa SPI
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#define SCK_GPIO 5
|
|
#define MISO_GPIO 19
|
|
#define MOSI_GPIO 27
|
|
#define NSS_GPIO 18
|
|
#if defined(T_BEAM_V10)
|
|
#define RESET_GPIO 14
|
|
#else
|
|
#define RESET_GPIO 23
|
|
#endif
|
|
#define DIO0_GPIO 26
|
|
#define DIO1_GPIO 33 // Note: not really used on this board
|
|
#define DIO2_GPIO 32 // Note: not really used on this board
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// AXP192 (Rev1-specific options)
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// #define AXP192_SLAVE_ADDRESS 0x34 // Now defined in axp20x.h
|
|
#define GPS_POWER_CTRL_CH 3
|
|
#define LORA_POWER_CTRL_CH 2
|
|
#define PMU_IRQ 35
|