rearrange files

dev/build.sh

@@ -0,0 +1,71 @@
+#! /bin/bash
+
+# Stop on the first sign of trouble
+set -e
+
+echo "The Things Network RPi + IC880A Gateway Builder/Installer"
+echo ""
+
+# Build in a temp folder that we'll completely  purge after build,
+# and install into the linux folder where apps reside.
+
+INSTALL_DIR="/opt/ttn-gateway"
+if [ ! -d "$INSTALL_DIR" ]; then mkdir $INSTALL_DIR; fi
+
+BUILD_DIR="$INSTALL_DIR/dev"
+if [ ! -d "$BUILD_DIR" ]; then mkdir $BUILD_DIR; fi
+
+# Switch to where we'll do the builds
+pushd $BUILD_DIR
+
+# Build WiringPi so that we can do Raspberry Pi I/O
+if [ ! -d wiringPi ]; then
+    git clone git://git.drogon.net/wiringPi
+    pushd wiringPi
+else
+    pushd wiringPi
+    git reset --hard
+    git pull
+fi
+./build
+popd
+
+# Build LoRa gateway app for this specific platform
+if [ ! -d lora_gateway ]; then
+    git clone https://github.com/TheThingsNetwork/lora_gateway.git
+    pushd lora_gateway
+else
+    pushd lora_gateway
+    git reset --hard
+    git pull
+fi
+sed -i -e 's/PLATFORM= kerlink/PLATFORM= imst_rpi/g' ./libloragw/library.cfg
+# Comment the following in or out as needed for hardware debugging
+#sed -i -e 's/DEBUG_SPI= 0/DEBUG_SPI= 1/g' ./libloragw/library.cfg
+#sed -i -e 's/DEBUG_REG= 0/DEBUG_REG= 1/g' ./libloragw/library.cfg
+#sed -i -e 's/DEBUG_HAL= 0/DEBUG_HAL= 1/g' ./libloragw/library.cfg
+#sed -i -e 's/DEBUG_AUX= 0/DEBUG_AUX= 1/g' ./libloragw/library.cfg
+#sed -i -e 's/DEBUG_GPS= 0/DEBUG_GPS= 1/g' ./libloragw/library.cfg
+make
+popd
+
+# Build the packet forwarder
+if [ ! -d packet_forwarder ]; then
+    git clone https://github.com/TheThingsNetwork/packet_forwarder.git
+    pushd packet_forwarder
+else
+    pushd packet_forwarder
+    git pull
+    git reset --hard
+fi
+make
+popd
+
+# Restore location back to where we were prior to starting the build
+popd
+
+# Copy things needed at runtime to where they'll be expected
+cp $BUILD_DIR/packet_forwarder/reset_pkt_fwd.sh $INSTALL_DIR/set-gateway-id.sh
+cp $BUILD_DIR/packet_forwarder/poly_pkt_fwd/poly_pkt_fwd $INSTALL_DIR/ttn-gateway
+
+echo "Build & Installation Completed."