Edit dsp310.ino added wire1 port for qwiic connector

README.md

@@ -6,3 +6,8 @@ Repo für den Arduino UNO R4 Wifi
 
 <img src="https://git.unixweb.net/joachim/arduino-uno-r4-wifi/raw/branch/main/images/Arduino-UNO-R4-Wifi-Uhr.jpg">
 </a>
+
+## Arduino Animation 
+
+<img src="https://git.unixweb.net/joachim/arduino-uno-r4-wifi/raw/branch/main/images/Arduino-UNO-R4-Wifi-Pfeil.jpg">
+</a>

animation/animation.h

@@ -0,0 +1,56 @@
+const uint32_t animation[][4] = {
+	{
+		0x800c0060,
+		0xf00f006,
+		0xc00800,
+		66
+	},
+	{
+		0xc0060030,
+		0xf80f803,
+		0x600c00,
+		66
+	},
+	{
+		0x60030018,
+		0xfc0fc01,
+		0x80300600,
+		66
+	},
+	{
+		0x3001800c,
+		0xfe0fe00,
+		0xc0180300,
+		66
+	},
+	{
+		0x1800c006,
+		0xff0ff00,
+		0x600c0180,
+		66
+	},
+	{
+		0xc006003,
+		0xff8ff80,
+		0x300600c0,
+		66
+	},
+	{
+		0x6003001,
+		0x8ffcffc0,
+		0x18030060,
+		66
+	},
+	{
+		0x3001800,
+		0xcffeffe0,
+		0xc018030,
+		66
+	},
+	{
+		0x1800c00,
+		0x6ffffff0,
+		0x600c018,
+		66
+	}
+};

animation/animation.ino

@@ -0,0 +1,45 @@
+/*
+  Projekt: Animation f<>r 12x8 Neopixel Display
+  Beschreibung: Dieses Sketch kann zur Nutzung auf einem Arduino UNO R4 Wifi mit dem Display genutzt werden
+
+  Autor:  Joachim Hummel
+  Datum: 08.02.2024 Erstellung
+
+  Arduino-Board:  Arduino Uno R4 WiFi
+
+
+  Lizenz: Apache 2.0
+
+  Hinweise:
+  - Die Nutzung des Code beinhaltet keinerlei Garantie oder Gew<65>hrliestung.
+    Die Nutzung erfolgt auf eigenes Risiko ohne Rechtsanspruch
+
+
+  Credits:
+  - Danke f<>r die Bereitstellung von Codeteilen aus der Arduino IDE
+
+  Weitere Informationen findest du in der README.md-Datei oder auf GitHub.
+*/
+
+
+
+#include "animation.h"            //Include animation.h header file
+
+// Create an instance of the ArduinoLEDMatrix class
+ArduinoLEDMatrix matrix;  
+
+void setup() {
+  Serial.begin(115200);
+  // you can also load frames at runtime, without stopping the refresh
+  matrix.loadSequence(animation);
+  matrix.begin();
+  // turn on autoscroll to avoid calling next() to show the next frame; the paramenter is in milliseconds
+  // matrix.autoscroll(300);
+  matrix.play(true);
+}
+
+void loop() {
+  delay(2500);
+  Serial.println(millis());
+}
+

mqtt-dht11-sensor/ardunio_secrets.h

@@ -0,0 +1,3 @@
+//arduino_secrets.h header file
+#define SECRET_SSID "xxxx"
+#define SECRET_PASS "xxxx"

mqtt-dht11-sensor/mqtt.ino

@@ -0,0 +1,118 @@
+/*
+  Projekt: MQTT Wifi DHT11 Sensor
+  Beschreibung: Dieses Sketch kann zur Nutzung auf einem Arduino UNO R4 Wifi mit dem Sensor DHT11 genutzt werden
+
+  Autor:  Joachim Hummel
+  Datum: 08.02.2024 Erstellung
+
+  Arduino-Board:  Arduino Uno R4 WiFi
+
+  Lizenz: Apache 2.0
+
+  Hinweise:
+  - Die Nutzung des Code beinhaltet keinerlei Garantie oder Gew<65>hrliestung.
+    Die Nutzung erfolgt auf eigenes Risiko ohne Rechtsanspruch
+
+
+  Credits:
+  - Danke f<>r die Bereitstellung von Codeteilen aus der Arduino IDE
+
+  Weitere Informationen findest du in der README.md-Datei oder auf GitHub.
+*/
+#include <ArduinoJson.h>
+#include <ArduinoJson.hpp>
+#include <WiFiS3.h>
+#include <PubSubClient.h>
+#include <Wire.h>
+#include <DHT.h> // Replace "Adafruit_BME680.h" with "DHT.h"
+#include "arduino_secrets.h"
+
+#define DHTPIN 8
+#define DHTTYPE DHT11
+DHT dht(DHTPIN, DHTTYPE);
+
+// please enter your sensitive data in the Secret tab/arduino_secrets.h
+char ssid[] = SECRET_SSID; // your network SSID (name)
+char pass[] = SECRET_PASS; // your network password (use for WPA, or use as key for WEP)
+const char* mqtt_server = "192.168.10.7"; //IP of your MQTT Broker
+
+WiFiClient espClient;
+PubSubClient client(espClient);
+unsigned long lastMsg = 0;
+#define MSG_BUFFER_SIZE (50)
+char msg[MSG_BUFFER_SIZE];
+int value = 0;
+
+void setup_wifi() {
+  delay(100);
+  Serial.println();
+  Serial.print("Connecting to ");
+  Serial.println(ssid);
+
+ 
+
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+
+  Serial.println("");
+  Serial.println("WiFi connected");
+  Serial.println("IP address: ");
+  Serial.println(WiFi.localIP());
+}
+
+void callback(char* topic, byte* payload, unsigned int length) {
+  // Handle incoming MQTT messages if needed
+}
+
+void reconnect() {
+  while (!client.connected()) {
+    Serial.print("Attempting MQTT connection...");
+    String clientId = "ESP8266Client-";
+    clientId += String(random(0xffff), HEX);
+    if (client.connect(clientId.c_str())) {
+      Serial.println("connected");
+      client.publish("outTopic", "hello world");
+      client.subscribe("inTopic");
+    } else {
+      Serial.print("failed, rc=");
+      Serial.print(client.state());
+      Serial.println(" try again in 5 seconds");
+      delay(5000);
+    }
+  }
+}
+
+void setup() {
+  Serial.begin(115200);
+  while (!Serial);
+  Serial.println(F("DHT11 test"));
+
+  dht.begin();
+
+  setup_wifi();
+  client.setServer(mqtt_server, 1883);
+  client.setCallback(callback);
+}
+
+void loop() {
+  if (!client.connected()) {
+    reconnect();
+  }
+  client.loop();
+  StaticJsonDocument<32> doc;
+  char output[55];
+
+  long now = millis();
+  if (now - lastMsg > 5000) {
+    lastMsg = now;
+    float temp = dht.readTemperature();
+    float humidity = dht.readHumidity();
+    doc["t"] = temp;
+    doc["h"] = humidity;
+
+    serializeJson(doc, output);
+    client.publish("/home/sensors", output);
+  }
+}

mqtt-wifi-dsp310-sensor/arduino_secrets.h

@@ -0,0 +1,3 @@
+//arduino_secrets.h header file
+#define SECRET_SSID "xxxx"
+#define SECRET_PASS "xxxx"

mqtt-wifi-dsp310-sensor/dsp310.ino

@@ -0,0 +1,141 @@
+/*
+  Projekt: MQTT Wifi DSP310 Sensor
+  Beschreibung: Dieses Sketch kann zur Nutzung auf einem Arduino UNO R4 Wifi mit dem Sensor DSP310 genutzt werden
+
+  Autor:  Joachim Hummel
+  Datum: 08.02.2024 Erstellung
+
+  Arduino-Board:  Arduino Uno R4 WiFi
+
+  Bibliotheken:
+  - [Liste der verwendeten Bibliotheken, inklusive Versionen wenn möglich]
+
+  Lizenz: Apache 2.0 
+
+  Hinweise:
+  - Die Nutzung des Code beinhaltet keinerlei Garantie oder Gew<65>hrliestung.
+    Die Nutzung erfolgt auf eigenes Risiko ohne Rechtsanspruch
+
+
+  Credits:
+  - Danke f<>r die Bereitstellung von Codeteilen aus der Arduino IDE
+
+  Weitere Informationen findest du in der README.md-Datei oder auf GitHub.
+*/
+
+
+
+#include <ArduinoJson.h>
+#include <WiFiS3.h>
+#include <PubSubClient.h>
+#include <Adafruit_DPS310.h>
+#include "arduino_secrets.h"
+
+Adafruit_DPS310 dps;
+Adafruit_Sensor *dps_temp = dps.getTemperatureSensor();
+Adafruit_Sensor *dps_pressure = dps.getPressureSensor();
+
+// Please enter your sensitive data in the Secret tab/arduino_secrets.h
+char ssid[] = SECRET_SSID; // Your network SSID (name)
+char pass[] = SECRET_PASS; // Your network password (use for WPA, or use as key for WEP)
+const char* mqtt_server = "192.168.10.7"; // IP of your MQTT Broker
+
+WiFiClient espClient;
+PubSubClient client(espClient);
+unsigned long lastMsg = 0;
+#define MSG_BUFFER_SIZE (50)
+char msg[MSG_BUFFER_SIZE];
+int value = 0;
+
+void setup_wifi() {
+  delay(100);
+  Serial.println();
+  Serial.print("Connecting to ");
+  Serial.println(ssid);
+
+  WiFi.begin(ssid, pass);
+
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+
+  Serial.println("");
+  Serial.println("WiFi connected");
+  Serial.println("IP address: ");
+  Serial.println(WiFi.localIP());
+}
+
+void callback(char* topic, byte* payload, unsigned int length) {
+  // Handle incoming MQTT messages if needed
+}
+
+void reconnect() {
+  while (!client.connected()) {
+    Serial.print("Attempting MQTT connection...");
+    String clientId = "ESP8266Client-";
+    clientId += String(random(0xffff), HEX);
+    if (client.connect(clientId.c_str())) {
+      Serial.println("connected");
+      client.publish("outTopic", "Sensor Online!");
+      client.subscribe("inTopic");
+    } else {
+      Serial.print("failed, rc=");
+      Serial.print(client.state());
+      Serial.println(" try again in 5 seconds");
+      delay(5000);
+    }
+  }
+}
+
+void setup() {
+  Serial.begin(115200);
+  while (!Serial) delay(10);
+
+  Serial.println("DPS310");
+  if (! dps.begin_I2C(0x77,&Wire1)) {
+    Serial.println("Failed to find DPS");
+    while (1) yield();
+  }
+  Serial.println("DPS OK!");
+
+  // Setup highest precision
+  dps.configurePressure(DPS310_64HZ, DPS310_64SAMPLES);
+  dps.configureTemperature(DPS310_64HZ, DPS310_64SAMPLES);
+
+  setup_wifi();
+  client.setServer(mqtt_server, 1883);
+  client.setCallback(callback);
+}
+
+void loop() {
+  if (!client.connected()) {
+    reconnect();
+  }
+  client.loop();
+  StaticJsonDocument<32> doc;
+  char output[55];
+
+  sensors_event_t temp_event, pressure_event;
+  
+  if (dps.temperatureAvailable() && dps.pressureAvailable()) {
+    dps_temp->getEvent(&temp_event);
+    dps_pressure->getEvent(&pressure_event);
+
+    Serial.print(F("Temperature = "));
+    Serial.print(temp_event.temperature);
+    Serial.println(" *C");
+    Serial.print(F("Pressure = "));
+    Serial.print(pressure_event.pressure);
+    Serial.println(" hPa"); 
+    Serial.println();
+
+    doc["temperature"] = temp_event.temperature;
+    doc["pressure"] = pressure_event.pressure;
+
+    serializeJson(doc, output);
+    client.publish("/home/sensors", output);
+
+    delay(5000);
+  }
+}