reflect changes in the config, too

config_webrx.py

@@ -98,20 +98,17 @@ Note: if you experience audio underruns while CPU usage is 100%, you can:
 # Check here: https://github.com/simonyiszk/openwebrx/wiki#guides-for-receiver-hardware-support #
 #################################################################################################
 
-# Currently supported types of sdr receivers: "rtl_sdr", "sdrplay", "hackrf", "airspy"
+# Currently supported types of sdr receivers:
+# "rtl_sdr", "sdrplay", "hackrf", "airspy", "airspyhf", "fifi_sdr"
 #
-# NEW: There is now custom connector software available, that is tailored for the use with
-# openwebrx. The connectors allow the SDR to be reprogrammed while running, which allows for
-# quicker profile changes. It also reduces the risk of a USB disconnect that can happen when the
-# SDR software is restarted, since the connector will run continuously.
-# Check out the connector repository here: https://github.com/jketterl/owrx_connector
+# In order to use rtl_sdr, you will need to install librtlsdr-dev and the connector.
+# In order to use sdrplay, airspy or airspyhf, you will need to install soapysdr, the corresponding driver, and the
+# connector.
 #
-# The following connectors are available (simply use them as the "type" in the config below):
-# "rtl_sdr_connector", "sdrplay_connector", "airspy_connector"
+# https://github.com/jketterl/owrx_connector
 #
-# NOTE: These connectors will become the default as soon as they have become mature; the existing
-# receiver types will then automatically be migrated to connectors. At that point, the old "nmux"
-# method will start to be phased out.
+# NOTE: The connector sources have replaced the old piped nmux style of reading input. If you still have any sdrs
+# configured that have type endin in "_connector", simply remove that suffix.
 
 sdrs = {
     "rtlsdr": {